• 1.1 Introduction of ITE and Workshop Safety

    • A. Learning Objectives

      • Know DAT/ITE curriculum and prospectus
      • Know the future development of technologies in China (NSE)
      • Know and apply safety rules of DAT/ITE

    • B. Notes

      B1. Introduction of the Curriculum

    • DESIGN AND TECHNOLOGY (DAT)

      It is an inspiring (鼓舞的), rigorous (嚴格) and practical (實用) subject. Using creativity and imagination, pupils design and make products that solve real and relevant problems within a variety of contexts, considering their own and others' needs, wants and values.

      In China: Fourteenth Plan (2021–2025)



      In UK

      In Hong Kong

      Hong Kong Curriculum
    • Learning Objective:
      Students are expected to develop the following :
      • creative, analytical and critical thinking abilities;
      • design, modelling and communication skills;
      • understanding of design practices and technological principles in a variety of broad inter-related design contexts; and
      • technological, social and entrepreneurship awareness.
    • Conceptual framework for learning in the DAT curriculum


      Thematic learning
      Thematic learning is a powerful strategy, as people retain integrated information better than fragmented bits and pieces. Meaningful learning occurs when new knowledge and skills are embedded in context, through which students can see the connections among ideas.

    • In LTPSS, a study of DAT ...

      • provides the basic competence needed for an understanding and appreciation of technological activities in general.
      • encourages learning to solve problems through application of a design process involving technology.
      • develops positive attitudes towards lifelong learning and the integration and the application of skills across the curriculum.
      • develops appropriate interpersonal skills and attitudes for working both independently and co-operately within a group.
      • helps students discover how technology has changed the society in general and the workplace in particular.

    • B2. Workshop Safety

    • Introduction to School Workshop Safety" video for technological subjects (Hong Kong)



      D&T Workshop Safety Video 1: Safety in the workshop (Singapore)


      D&T Workshop Safety Video 2: Using Tools Safely (Singapore)

       


      News about some industrial accidents in Hong Kong


    • Learning to work safely

      Introduction

      • Safety must be considered at all times.
      • If you are considered by others to be tidy, and prepared to 'ask if unsure', you should be a reasonably safe person.
      • Remember that an eye or an arm cannot be replaced.


      Rules (Don't)

      • Do not enter the workshop without teachers' permission or supervision.
      • Do not run in the workshop.
      • Do not fool about in the workshop.
      • Do not interfere with other people's work.
      • Do not eat or drink in the workshop.
      • ...


      General Rules

      • Follow the instructions by teachers or technicians. Sit according to the arrangement of teachers.
      • Do you know where the emergency buttons are located?
      • Extra special care needs to be taken with your eyes -- Protect them with GOGGLES.
      • Wear an apron and appropriate footwear.
      • Loose clothing and jewellery must either be removed or tucked in.
      • If you have long hair, it will need to be tied up.
      • Wear gloves when necessary.
      • You need to be aware of your surroundings!
      • ...


      First Aid

      • All injuries must be reported to the teacher.
      • Burns 
        • place in cold running water for at least 10 minutes.
      • Bleeding
        • Try to raise the cut above the heart level to reduce the bleeding.
      • Eye 
        • If dust gets into your eyes, try to wash it out with clean water or with an eyeglass.
      • Fainting
        • Lay the patient down gently on the floor.
      • We will not hesitate to send you to the school nurse if that is required.
      • ...


      Hand Tool Safety

      • Keep your bench tidy.
      • Carry tools carefully in the workshop.
      • Tidy tools away after use.
      • Report any breakages of tools
      • ...


      Power Tool / Machine Safety

      • Never use a machine unless you have been instructed in its safe use.
      • Only one person per machine.
      • Safety guards and goggles to be used.
      • Work must be held firmly or clamped.
      • Double check before starting.
      • Switch OFF the machine when you are finished.
      • Tidy up after use.
      • ...


        Electrical Safety

        • Electricity kills
        • Before using electrical equipment check everything is intact (no missing pieces or broken wires)
        • Soldering irons become extremely HOT.
        • Hot glue guns are very HOT.
        • ...


        Summary


        SAFETY RULES ARE FOR EVERYONE.

        YOUR SAFETY IS OUR PRIORITY.

      • C. Coursework